======================================
************** Important ***************
======================================

Please uninstall an older version of Tx-Control2
before you install this version!!!
The system behavior is otherwise not 
predictable and can result in a system crash.

Do NOT install multiple versions of Tx-Control2
to different directories on the same computer.
Only the version installed last will work as
expected!

!!! WinXP-Users within a default Installation MUST
!!! have local Administrators rights in order to 
!!! install and run the program.

**************************************

06.06.2007	Tx-Control2 Ver. 1.8.0 (Build 477)
* Bugfix: Corrections in french texts.
* Bugfix: Corrections in the configuration window from the 
          VHF/FM Transmitter U1 SV325x device.

======================================
25.07.2006	Tx-Control2 Ver. 1.7.0 (Build 472)
* NEW: A new I/O-connection was integrated into the program.
       This I/O-Port communicate via a modem connection with
       the device.
* In the device selection form the short names for the devices
  has been changed to a short description of the device.
* By loading a configuration file in online mode a progress window 
  is shown 
* New: a short description in english and french  
* Bugfix: in the measurement file has been inserted a separator
          (TABULATOR) between the measured value nad the scale unit
* Bugfix: on the TP328X configuration form the incorrect scale unit 
          "min." was changed to "sec."
* Bugfix: the setting range of RF-level has been expand from -4.5dB
          to -6.0dB (T327x and TP328x)
* Bugfix: every text of the TP328x-forms translated to englisch
          and french 	  
* Bugfix: 2 missing dimension units in the protocoll of measured values	  

======================================
19.01.2006	Tx-Control2 Ver. 1.6.0 (Build 408)
* Company name change from TELEFUNKEN to TRANSRADIO.
* No functional change in this version.

======================================
08.03.2005	Tx-Control2 Ver. 1.5.1 (Build 407)
* Bugfix: Error/Warning handling could drop some 
          warning messages in rare circumstances
* NEW: settings of tranposer TP328x implemented
       (nearly german-only in this version)

======================================
06.01.2004	Tx-Control2 Ver. 1.4.3 (Build 399)
* Bugfix: Program didn't store changed COM port settings
* Bugfix: for 10kW U1 transmitters, not all measurement 
          values where stored

======================================
02.12.2004	Tx-Control2 Ver. 1.4.2 (Build 398)
* Bugfix: Program crashes on Win9x systems while startup
=> now, on Win9x systems Tx-Control2 is german only

======================================
01.12.2004	Tx-Control2 Ver. 1.4.2 (Build 397)
* Bugfix: TCP/IP connections in "Offline" mode behaves
          as expected now
* new settings of N+1 CCU 7456 implemented
* translation of ZBG screens completed
* Bugfix: writing logs could crash program

======================================
16.11.2004	Tx-Control2 Ver. 1.3.6 (Build 390)
* values are invalidated immediatly if cable is disconnected
* speedup of communication - especially on serial lines
* splitup ErrorCode and WarningCode DB's
-> Bugfix: Warning message for CCU 7456 are now correct
!!! New pages are only partly translated to french!
!!! This is only for CCU 7456!

======================================
05.11.2004	Tx-Control2 Ver. 1.3.0 (Build 384)
* UKW N+1 ZBG integrated
* Bugfix: 10kW U1 power was displayed incorrectly
* many minor modifications, improvements and bugfixes
!!! New pages are currently only german! This is mainly for CCU 7456!

======================================
03.09.2004	Tx-Control2 Ver. 1.2.5 (Build 361)
* the measurement values taken from U1 are corrected and integrated more
  smothly
* many minor modifications, improvements and bugfixes
* advanced support for the higher power T327x regarding calibration
* corrected translations into english and french

======================================
17.05.2004	Tx-Control2 Ver. 1.2.1 (Build 352)
* es kann in den Programm-Optionen zwischen seriell und TCP/IP gewechselt werden
* die U1 Familie (CU) ist in das Programm integriert
* viele kleinere Verbesserungen und Korrekturen

======================================
17.03.2004	Tx-Control2 Ver. 1.1.0 (Build 309)
* Testversion für TCP/IP mit Klartext-Übertragung
* Gerätekommunikation auf I/O-DLLs umgestellt

======================================
01.08.2003	Tx-Control2 Ver. 1.0.1 (Build 295)
* Testversion für TCP/IP mit Klartext-Übertragung
* IP-Adresse und Port des Gerätes/Konverters wird in Registry gespeichert
* Hilfedateien werden richtig geladen


13.11.2002	Tx-Control2	Ver. 1.0.1 (Build 285)	

Fehlerkorrekturen und Erweiterungen:
* kleinere Korrekturen bei der Internationalisierung
* Hilfedateien können sprachenäbhängig sein; die Hilfedatei wird mit der entsprechenden Endung gewählt 
  (z.B. Help/TxControl2DEU.hlp für die deutsche Hilfedatei)
* Programm läßt sich jetzt auch bei einem Laufzeitfehler immer beenden


03.09.2002	Tx-Control2	Ver. 1.0 (Build 278)	

== first final release ==